- Refrigerated Air Dryer
- Air Filter
- Extractor Dryer
- Air Tubing / Air Hose / Copper Tubing
- Push In Fitting / Brass Fitting / Ouick Coupler
- Push In Fitting
- Brass Fitting
- 0206 - Allen Key Plug
- 160 - Sleeve
- 162 - Union
- 164 - Tee Union
- 166 - Female Connector
- 168 - Male Connector
- 169 - Male Connector Elbow
- 71 - Taper Plug
- 71F - Female Plug
- 72 - Adaptor
- 73 - Reducing Bush
- 74 - Hexagon Socket
- 76 - Nipple
- 77 - Reducer Nipple
- 78 - Male/Female Elbow
- 79 - Female Elbow
- 80 - Female Tee
- 81 - Tail Piece
- 82 - Female Tail Piece
- 82 - Female Tail Piece(PCK)
- 84 - Joiner
- 86 - Tee Joiner
- 89 - Y Joiner
- 92 - Male Elbow
- 94 - Male Branch Tee
- L83 - Tail Piece Elbow
- Compression Fitting
- Coupler
- Silencer
- Others
- Pneumatic Components
- Clean Air Unit
- Control Valve
- Check Valve
- Cylinder
- Standard Cylinder
- Mini Cylinder
- Compact Cylinder
- Mini Free Mount and Multi-mount Cylinder
- Plate and Threaded Cylinder
- Twin-rod Cylinder
- Tri-rod Cylinder
- Slide Table and Compact Slide Cylinder
- Rodless Magnetic and Rotary Table Cylinder
- Air Gripper Series
- Clamp Series Cylinder
- Stopper Cylinder
- Chelic Compact Air Cylinder
- Cylinder Accessories
- Chelic
- Airtac
- CKD
- Festo
- SMC
- Condensate Drain
- More Products
Prominent Supplies (M)
Sdn Bhd
58-G, Jalan Nagasari 1,
Taman Nagasari,
13600 Perai,
Pulau Pinang, Malaysia.
TN Series Cylinder
Previous | 2 / 2 | Next |
1.Enterprises standard is implemented.
2.Embeded installation and fixation mode saves the installation space.
3.It is good resistance to bending and twisting moments.
4. Mounting holes on three sides facilitates multi-position mounting.
5.Bumper in front of the barrel can adjust the stroke of cylinder and relieve impact.
6.Standard configuration of this series has magnet and the type without magnet is not available.
Installation & Usage
1.When load changes in the work, the cylinder with abundant output capacity shall be ed.
2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion;
3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder;
5.The medium used by cylinder shall be filtered to 40μm or below.
6.As both the front cover and piston are short, too large stroke can not be ed.
7.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
8.The cylinder shall avoid redial load in operation to maintain the normal and extend service life.
9.If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust cap shall be ed into the inlet and outlet ports. As the precision of the manufacture and guide is high, Please do not dismantle the fixed block or cylinder cover .
Ordering code
Stroke | Bore Size |
---|
(mm) | 10 | 16 | 20 | 25 | 32 |
10 | |||||
20 | |||||
30 | |||||
40 | |||||
50 | |||||
60 | |||||
70 | |||||
80 | |||||
90 | |||||
100 | |||||
125 | |||||
150 | |||||
175 | |||||
200 |
Symbol